/* ************************************************ */ /* */ /* Doric Neuroscience Studio (DNS) V6 */ /* */ /* ************************************************ */ DNS Version : [6.8.0.9] Release date (R&D) : N/A (In Progress) Release date (Prod/Web) : N/A (In Progress) [NEW] [BBC300] - Added option if there is a RBFMC_Gen2 opened as slave to use external M8 EEPROM infos for a certain AOUT (LED output) [WiOG] - Put back the LED current data (1 byte) at 100Hz [BUG-FIXES] [BBC300] - Fix problem with multiple preset using same channel (prevent crash and mismatch of channel) - Fix RBFMC_Gen2 motor power button in incorrect state when added to view (as slave) [Camera] - Saving camera information at the beginning of acquisition to have info in case of crash [Microscope] - Fix orientation of images (added 90° counterclockwise + horizontal flip) [WiOG] - Fix saturation bar that goes back to default value (3V) when starting an acquisition - Fix to remove Headstage256 folders when headstage get disconnected while acquiring data DNS Version : [6.8.0.8] Release date (R&D) : February 16th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [NC500] - Possibility to change TimeON value when doing INTERLEAVED mode [BUG-FIXES] [General] - Fix for inverted color in images video feed using FFMPEG - Fix pixels filtered when zoomed in on image view DNS Version : [6.8.0.7] Release date (R&D) : February 13th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [LightSource] - Integration of CLED HP [Voluscan Gen.3] - Adapting configurations to handle different BNC used for DISK & CAM1 [BUG-FIXES] [General] - Fix graphs order and sorting type when loading a configuration - Fix problem when DNS still running in background after being closed [WiFP] - Fix saturation bar value when changing WiFP ADC range DNS Version : [6.8.0.6] Release date (R&D) : February 9th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [Voluscan] - Added support for X-MCA controller + LSA10A-T4A linear motor [BUG-FIXES] [General] - CW signal are now always infinite by default (not 50 ms anymore) - Possibility to toggle ROI(s) graphs [Camera] - Fix camera color for CamLoop (RGB vs BRG vs HSV) - Fix grayscale for CamLoop [FluoPulse] - Converting graph time to be have more precision to show nanoseconds (instead of only milliseconds) [FMD2] - Fix demo mode to prevent crashes when acquiring fake data/images DNS Version : [6.8.0.5] Release date (R&D) : January 29th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - Updating copyright date [BUG-FIXES] [FluoPulse] - Adding more delay to make sure all the DIO are present at last saving DNS Version : [6.8.0.4] Release date (R&D) : January 29th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - Improved image viewer for multiples devices (FMD3, BBC300, RBMFC etc.) [Voluscan] - Control of Hamamatsu camera integration (still in progress) [BUG-FIXES] [NC500] - Fix editing of BFMC channel [Wireless] - Fix decoding of driver version (BCD format to decimal) DNS Version : [6.8.0.3] Release date (R&D) : January 26th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [BUG-FIXES] [General] - Fix for handling empty filename (in saving options). No more false error message. [IMU] - Updating minimum compatible version (6.0) [Wireless] - Updating minimum compatible version (WiOG [4.0], WiFP [12.0], Wireless Basestation [12.0] DNS Version : [6.8.0.2] Release date (R&D) : January 21th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - Save computer information to configuration file (OS, CPU, GPU, RAM etc) [BUG-FIXES] [FluoPulse] - Fix to block preheating options when already acquiring data [WiFP/WiOG] - Fix randow crashes when used with BBC300 - Fix problem of editing WiOG/WiFP when used with BBC300 DNS Version : [6.8.0.1] Release date (R&D) : January 15th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [BBC300] - Adding more flxibility on saving options (trace per trace) [Camera] - Adding dropped frame event - Replacing dropped frame with last valid image [Microscope] - Adding line dropped event - Replacing dropped line with last valid line of last valid image [WiFP] - Adding rotation in Z [WiOG] - Adding rotation in Z [BUG-FIXES] [General] - Fix DeltaF/F calculation when used in gated mode - Fix event saving/loading [Camera] - Fix maximum exposure available to ensure FPS consistency - Fix to prevent user to start acquisition when doing a calibration [FluoPulse] - Fix loading of TimeSeries settings - Fix first timestamp (now on start received instead of first point acquired) - Fix point received in the wrong series when in gated mode [WiFP] - Improvement of IMU data handling - Fix overlapping of staturation line and the data trace [WiOG] - Improvement of IMU data handling DNS Version : [6.8.0.0] Release date (R&D) : January 5th, 2026 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - New ways to handle images to prevent random DNS crashes - Generalization of code (DIO, CMOS etc.) for FMD3, FluoPulse & NC500 [BUG-FIXES] [General] - Fix random crashes when using ROI(s) DNS Version : [6.7.1.1] Release date (R&D) : December 3rd, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [WiOG] - Hiding Complex mode - Hiding triggering mode DNS Version : [6.7.1.0] Release date (R&D) : December 1st, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] - Same as 6.7.0.6 [NEW] - Same as 6.7.0.6 DNS Version : [6.7.0.6] Release date (R&D) : December 1st, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix clear configuration (will now reset all global settings) [LightSource] - Fix StartAll/RecordAll (was not restarting on second start/record all) [FMD3] - Fix timing of the starting delay (more precise) [NEW] [BFPD/BFMC/BBC300] - Updating possible frequency depending on device time resolution [WiOG] - Adding low battery pop-up message - Adding software triggers (WIP, will be hidden for customer release) DNS Version : [6.7.0.5] Release date (R&D) : November 27th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300/BFMC] - Fix feed switches in timeseries and gated mode happening when end of serie/gate was not synced - Fix red markers not cleared in timeseries mode - Fix LED power slider sometimes disabled when using timeseries mode - Default sampling freq at 10kHz [FMD3] - Fix problem where number of ROI data was not equal to amount of images DNS Version : [6.7.0.4] Release date (R&D) : November 18th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix saving of starting delay (for large value) [FMD3] - Fix for SNAP that was unlock while the file was still saving last recording [NEW] [BFMC/BBC300] - Use of calculation in period instead of frequencies. (This is to make sure it is a precise value that the driver can achieved.) [IMU] - Improvement of the rotation calculation - Integration of the Z axis rotation [WiOG/WiFP] - Max. basestation connected to BBC300 is now block at 4 - Removing LED graph - Adding signal strenght graph DNS Version : [6.7.0.3] Release date (R&D) : November 18th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [FluoPulse] - Disabling load/save IRF in IRF config view - Fix red markers not cleared on new acquisition - Fix label of amplitude shown in IRF, - Fix editing not working when all DIOs were set [NEW] [FluoPulse] - Can enable more than one laser excitation. - Modified .doric file : Calculation & Detector now have the number associated Ex Calculation1, Detector2 - New setting added in debug mode to easily change between ADC single and multiple channel mode - Started implementation of multiple graphs in signal viewer to test ADC with 2 channels - Better handling of ADC channel ID - Major changes to interface, we can now setup an interleave mode so all the graphs/plots/settings have been duplicated (WIP) - Handling both 3.2 and 6.4 Gsps sampling rates - Handled IRF acquisition for dual mode - Adding band-stop filter (debug mode option) DNS Version : [6.7.0.2] Release date (R&D) : November 13th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [ARJ] - Fix possibility to open multiple controls windows at the same time - Fix to make sure all the controls are reset when closing the controls window [BBC300] - Fix closing of the save file to make sure it does not stay INCOMPLETE - Clean away a lot of qDebugs [WiFP/WiOG] - Remove automatic starting delay between sequences - Add starting delay to the row instead of having delay sequence DNS Version : [6.7.0.1] Release date (R&D) : November 13th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix loading/saving of DIO(s) events - Fix preview graph(s) when using a signal with a starting delay [BBC300] - Change starting delay fo the second camera to be timed with lightsource excitations (IMPORTANT ! Need firmware update) [NC500] - Fix naming of lock-in trace when multiples master (AIn) use same slaves (AOut) - Fix to load BFMC camera even if the camera as changed (not the same serial) - Modification of lock-in frequencies to use value that create less P-P noise. [WiFP/WiOG] - Fix to make 2 headstage with 2 basestation work - Fix saving/loading configuration - Fix to make sure already used basestation channels cannot be reused [NEW] [WiFP/WiOG] - Adding saturation line to graph(s) - Adding complex mode for WiOG headstage DNS Version : [6.7.0.0] Release date (R&D) : October 28th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [NC500] - Fix clear configuration - Fix interleaved when use with other DIO(s) than the default one - Fix name of DIO(s) use with interleaved (front vs back) - Fix AIn filter when use with other AIn(s) thant the default one [FMD3] - Fix channel (DIO) with no data DNS Version : [6.6.3.21] Release date (R&D) : November 6th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [WiFP/WiOG] - Prevent user to use same wireless channel DNS Version : [6.6.3.20] Release date (R&D) : November 5th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [WiFP/WiOG] - Fix usage of 2 basestation DNS Version : [6.6.3.19] Release date (R&D) : October 22th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix deletation of points markers - Fix deletation & editing for DeltaF/F signals [BBC300/BFTO] - Fix deletation of ROI(s) that are automatically generated [FMD3] - Fix for bump at end of DIO sequences [NEW] [FluoPulse] - First draft for dual channels [WiOG] Now handling LED data DNS Version : [6.6.3.18] Release date (R&D) : October 15th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix problem where file stays INCOMPLETE after recording (Problem occurs with webcams as slave device) [Microscope] - Fix loading of image zoom settings [NC500] - Remove possibility to create a modulation with errors [WiOG] - Fix editing of configuration - IMU and state signal now oversampled at current signal sampling rate (50 us). - Fix saving/loading of configuration DNS Version : [6.6.3.17] Release date (R&D) : October 6th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix saving of in GATED mode with MULTIPLE SERIES - Fix for DeltaF/F triggering [NC500] - Fix deletation of the device when it is unplugged or shutdown while running [FMD3] - Fix clear configuration (all ROI(s) are now cleared) [NEW] [General] - Doric Maintenance Tool (v1.3.2.0) DNS Version : [6.6.3.16] Release date (R&D) : September 25th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix for triggering source [BFPD] - Fix for deltaF/F initialization (crash upon start) [NC500] - Fix expand/collapse of item in device list - Fix max voltage value for AOut channels - Fix loading of ROI(s) [NEW] [WiOG] - Adding more info (calibration offset, calibration factor etc...) DNS Version : [6.6.3.15] Release date (R&D) : September 18th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [NC500] - Fix event timing when adding & removing ROI(s) graph(s) - Fix AOut bad displace in the configuration view - Fix triggering source & triggering type when using keyboard triggers [NEW] [BugSplat] - Adding more debugging information if software crash [General] - Adding deltaF/F graph(s) for ROI(s) [BFMC] - Adding ROI(s) auto-creation [WiOG] - Now working for CW & Square mode (still in progress) DNS Version : [6.6.3.14] Release date (R&D) : September 12th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [FPC/EPC] - Fix triggering type/mode (editing/saving) [NEW] [ARJ] - Unlock manual controls DNS Version : [6.6.3.13] Release date (R&D) : September 10th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [FPC/EPC] - Fix triggering source (editing/saving) [WiFP] - Fix IMU angle data when use as slave of BFMC/BBC300 DNS Version : [6.6.3.12] Release date (R&D) : September 8th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [WiFP] - Fix data visualization for IMU [NEW] [Camera] - Removing LEGACY drivers for behavior, BMFC and CamLoop camera. Only newest drivers included. - Filtering camera name so behavior, BMFC and CamLoop are not listed as webcam DNS Version : [6.6.3.11] Release date (R&D) : September 5th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [CamLoop] - Fix crashes upon ROI(s)/Zone(s) deletation [WiFP] - Fix acquisition starting problem when used with BBC300 [NEW] [General] - Option for auto-creation of ΔF/F signal with BFMC and microscope ROI(s) DNS Version : [6.6.3.10] Release date (R&D) : September 3rd, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [NC500] - Fix to show that the DIO8(Front) is reserved for microscope output triggering [WiFP/WiOG] - Fix headstage default name for second, third and fourth paired - Fix tab index name when editing headstage - Fix lock-in frequency editing (need headstage firmware update) [NEW] - New trigger type. Can now trigger signal via keyboard event (key pressed) DNS Version : [6.6.3.9] Release date (R&D) : August 25th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix timing & flushing signal for most devices [BFPD] - Fix 'Already ROI drawn' message boxes popping multiple times when loading configuration - Fix loading of pseudo-color - Fix uncentered configuration view [FMD3] - Fix loading that was creating multiple time the same settings (DIO) - Fix SNAP mode that was enable when not ready - Fix SNAP mode with multiple ROIs. Now saved all ROIs data - Fix DIO TimeON that was not at the right value when editing - Fix DIO(s) sampling rate [FPC] - Fix DIO(s) TimeON editing with big values [NC500] - Fix/remove possibility to use same camera with multiple BFMC configuration - Fix minor UI oddity - LockiIN delta/F now decimated like other signals - BFPD options now called BFMC options [RotaryJoint] - Fix issue with opening/closing rotary joint that was destroying an important signal used by other slave (wasn't able to remove a camera after that) [WiFP] - Fix decimation for IMU & state data - Fix first timestamp issues (doubled values) - Fix lockin timing issue when using decimation [NEW] [DeltaF] - Now use same decimation as the device it is use with DNS Version : [6.6.3.8] Release date (R&D) : July 31th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [NC500] - Can now use console even if no calibration is detected [WiFP] - Fix decimation for IMU & state signal [NEW] [BugSplat] - Adding a comment section for user description DNS Version : [6.6.3.7] Release date (R&D) : July 30th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - ROLLBACK : Using resolution of 528x528px instead of 540x540px. (TIS camera can not do 540x540.) [NC500] - Fix for default sampling rate when used as BFPD/BFMC - Fix adding channel (problem with selection of the channel type) DNS Version : [6.6.3.6] Release date (R&D) : July 29th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Using resolution of 540x540px instead of 528x528px [NC500] - Quick fix to prevent crash when clicking ADD CHANNEL DNS Version : [6.6.3.5] Release date (R&D) : July 28th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix to remove point markers from IMU channel - Fix channel autoscrolling when used as slave [BBC300] - Fix scrolling on slider widget of the light power [FluoPulse] - Fix autoscrolling of EVENTs channel [WiFP] - Fix sampling rate of 5kHz (was 2kHz) - Fix the saving of headstage settings [NEW] [BBC300] - Delta F over F [FMD3] - Delta F over F [NC500] - Delta F over F [WiFP] - Oversampling of the STATE & IMU signals to have the same sampling rate as the RAW ADC data DNS Version : [6.6.3.4] Release date (R&D) : July 11th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix possibility to change CW voltage for Analog Out channel(s) [BFPD] - Adding back the 3Hz & 10Hz preset [FluoPulse] - Fix camera saving [NC500] - Fixes for usage as BFPD - Fix for sorting ROI(s) graphs [NEW] [BFPD] - Add Camera stream statistics for dropped frame. [FluoPulse] - Include CamLoop - Add pre-configured option for camera triggers. [WiFP] - New configuration view for WiFP headstage settings DNS Version : [6.6.3.3] Release date (R&D) : June 18th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [FMD3] - Fix SNAP functionalities (sometimes it was sending image like in LIVE mode) [IMU] - Fix time overflowed [LightSource] - Fix timeserie with CamLoop that was saving only one video file for all the series (now video are really split into series) - Fix lightsource information when in EDIT mode (was always showing LED1 information) [FluoPulse] - Double exponential now lock. Need Doric hidden feature shortcut to unlock. [NC500] - Fix saving of microscope ROI(s) (if only microscope is used) - Fix reset of lock-in LED power when changing power mode - Fix recording ROI(s), overwriting file and file that stay incomplete when used with CamLoop - Fix saving of CamLoop zones (zones were not saved at all) [Voluscan] - Fix for recording when in CurrentPosition mode. Area names not use anymore. [WiFP/WiOG] - UUID always in uppercase - Fix problem where the headstage LED information was not good when first showing the dialog - Fix problem where the RSSI and battery level was not update in real-time in the EDIT view - Fix optimal zooming (autoscale function) - Fix WiFP ADC values decoding - Fix headstage indexes when unpairing/pairing multiple times - Fix problem where headstage was still paired even after being remove with minus button - Fix problem where no more IMU data was shown after lost connection & repairing with a WiFP/WiOG headstage [NEW] [BBC300] - Signal decimation [FluoPulse] - Add software trigger functionality (for CamLoop usage) [IMU] - Now limited at 800Hz sampling rate [Lightsource] - Integration of the REMOTE controller DNS Version : [6.6.3.2] Release date (R&D) : June 5th, 2025 Release date (Prod/Web) : N/A (In Progress) Same as 6.6.3.1 (had problem with BugSplat symbol) DNS Version : [6.6.3.1] Release date (R&D) : June 4th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix possible video feed switch while using the TimeSeries mode - Fix loading video feed pseudo-color settings - Fix editing DIO(s) (Time ON & duty cycle values) - Fix refreshing of battery level & signal strength (WiFP/WiOG) in view - Fix crash when closing the device while connected with a wireless basestation [NC500] - Fix reset of lock-in LED power when changing power mode [WiFP/WiOG] - Fix synchronization with BBC300 signals [NEW] [BBC300] - New interface for WiFP/WiOG configuration *** IMPORTANT CHANGES *** (Need newest firmware(s)) [FMD3] -Better image timing - Fix problem with image tearing - Fewer images loss - Improvement of data loss handling (Can loose small package/line instead of systematically invalidate the whole image) [NC500] - WiFP/WiOG integration - BFPD mode integration (with Analog Output) - CamLoop integration - FMD3 (microscope) functionalities revised - Better image timing - Fix problem with image tearing - Fewer images loss - Improvement of data loss handling (Can loose small package/line instead of systematically invalidate the whole image) [WiFP/WiOG] - New headstage type (WiOG -> Optogenetic) DNS Version : [6.6.3.0] Release date (R&D) : May 14th, 2025 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [Camera] - Saving in GATED mode if no gate is received [NC500] - Fix loading starting delay of lock-in - Fix editing lockin AnalogOut voltage DNS Version : [6.6.2.0] Release date (R&D) : May 13th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [WiFP] - Adding warning/tips to customer to make sure they click ADD after pairing a device. This ensure that the configuration is sent to the device and the view - LED2 options now blocked if the headstage only have 1 LED [BUG-FIXES] [Camera] - Camera name now always include an index (BehaviorCamera1, BehaviorCamera2 etc.) [Microscope] - Fix loading of trigger output mode if DNS is closed & reopened wihtout the device being reset - Fix loading of zoom value [NC500] - Fix saving/loading of traces color & name [Voluscan] - Channel (DIO) now name DIO channel instead of OTPG channel DNS Version : [6.6.0.4] & [6.6.1.0] Release date (R&D) : May 1st, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - Preview graph(s) now always optimal zoomed in Y axis [BBC300] - Camera video feed offset now available for all camera - Camera video feed autocenter now available for all camera [Microscope] - Safety check added for reading microscope memory. If corrupted, we get an error message - ROI graph(s) can now have marker for point (red marker with value in X-Y) [WiFP] - Headstage now use USB comm. with endpoint instead of USB comm. serial - Information about serial number now shown in interface [BUG-FIXES] [BPFD] - Fix configuration view after adding configuration. Now show the current configuration instead of a new one since we can only have one configuration at the time. - Fix file saving when no data is received. Will not create empty dataset & video folders [Microscope] - Adding the starting delay to the first timestamp to improve analysis [NC500] - Fix saving webcam timestamps - Fix camera name indexes in saved file (configuration vs dataset) - Fix crash when using filtered EPHYS/INTAN electrodes - Fix saving structure for filtered EPHYS/INTAN electrodes DNS Version : [6.6.0.3] Release date (R&D) : April 23th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [GENERAL] - danse link now added to software - Resolution now called IMAGE SIZE - Fix timeserie saving with webcams [BBC300] - TimeSerie with SINGLE serie mode - Add pseudo-color to video feed - Adding possibility to change sampling rate of WiFP headstage [NC500] - TimeSerie with SINGLE serie mode - Add pseudo-color to video feed - Adding possibility to change sampling rate of WiFP headstage [BUG-FIXES] [FPC/EPC] - Fix loading configuration that might crash [FMD2] - Fix exposure that is not refreshed after closing & opening back DNS DNS Version : [6.6.0.2] Release date (R&D) : April 4th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [BUG-FIXES] [BBC300] - Fix problem with missing data after linking & unlinking ROI(s) [FPC/EPC] - Fix TimeSerie that is stuck on 99% when completed DNS Version : [6.6.0.1] Release date (R&D) : March 28th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [FluoPulse] - Now using lifetime SAMPLING RATE instead of NUMBER OF SAMPLES - All errors message are temporary disabled for better debugging/handling of them [BUG-FIXES] [Camera] - No more ROI(s) graph if no zone are drawn [BBC300] - Fix shifting issues with higher frequencies (reduced max exposure) [FPC/EPC] - Fix video file when used in TimeSeries (single serie) [Microscope] - Fix TTLOutput options that was always on [NC500] - Fix disappering saving checkbox when rescaling column - Fix username and name saved for some datasets [Voluscan] - Fix resolution loading from configuration file - Fix ROI(s) deletation DNS Version : [6.6.0.0] Release date (R&D) : March 14th, 2025 Release date (Prod/Web) : N/A (In Progress) - Same as 6.5.0.12 DNS Version : [6.5.0.12] Release date (R&D) : March 14th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [BUG-FIXES] [FluoPulse] - Fix for settings & configuration message [NC500] - Blocking sampling rate to 10KHz if used in lock-in mode [General] - Removing slave widget from events configuration interface [Edit mode] [Rotary Joint] - Fix problem of settings not updated correctly (flickering) DNS Version : [6.5.0.11] Release date (R&D) : March 5th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [FluoPulse] - Adding TimeSerie functionality - Baseline removal is now recalculated on each waveform received - Adjusted maximum for cutoff setting - Putting a higher artifact threshold [BUG-FIXES] [Camera] - Fix for disconnection (removed from view) of webcam used as slave [FPC/EPC] - Fix crash when unplugging INTAN will acquiring data [NC500] - Fix for start/stop microscope [IMU] - Fix saved data format [WiFP] - Saving LockIn dataset with same name as the group name (too ease analysis) - Saving intertial sensor (IMU) data into split dataset (no more concatenated data columns) DNS Version : [6.5.0.10] Release date (R&D) : February 25th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [BBC300] - Show Analog Out trace into interface - Fix CLEAR CONFIG. (now clearing all channels) [FPC/EPC] - TimeSeries can now saved into a SINGLE serie [WiFP] - Now saving USERNAME into dataset attribute & configuration [BUG-FIXES] [BBC300] - Fix issue with global gated mode & flushing signals (using new camera driver) - Fix to clear username upon reset - Improve timing/synchronization with WiFP basestation (slave) [WiFP] - Fix saving of data (adding more safety (mutex) on data) DNS Version : [6.5.0.9] Release date (R&D) : February 20th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [FluoPulse] - Added a lifetime calculation performance status - Adding QSettings for FluoPulse voltage range and choice of detector (used for debug only, need restart of DNS + driver) [LightSource] - Renaming SplitCable to only Cable [BUG-FIXES] [BBC300] - Improvement of timing with WiFP slave (relative timestamp) [FluoPulse] - Fixed issue with loading IRF - Fixed data not saved if lacking calculations power from computer, - Adjustments to margins + sync between graphs [WiFP] - Fix recording of long acquisition - Fix for TRIGGERED & GATED mode DNS Version : [6.5.0.8] Release date (R&D) : February 17th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [Microscope] - Added more safety check on Ethernet interface type (now skip Wifi and other type of interface) [DMT] - Include newest version of Doric Maintenance Tool (v1.2.6.0) [BUG-FIXES] [FluoPulse] - Removed choices for nbSamples (kept only 8k, 16k, 64k) - Added a baseline correction that we can toggle for debug (config tab, main view) - Added a timer in IRF acq view to unlock view after a while if no data had been received (message popping up too) - Fixed some behaviors in IRF acq view (buttons enabled/disabled, graphs visibility, etc) - Fixed IRF not reset when clearing config. - Removed the debug checkbox to enable/disable the baseline correction (we now force it enabled) - Saving events and slave infos + fixed crash when loading config with no IRF [WiFP] - Fix clear configuration if headstage not paired - Fix saved dataset format (lockin in 2 separate folders) DNS Version : [6.5.0.7] Release date (R&D) : February 11th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [FluoPulse] - Now have flush signal when data are all sent (Flush is now only handled by hardware response) - Now can only choose one excitation (radiobutton) in config view and can only update the 1st detector (no more 2nd for now, not even handled hardware-wise) - Confirm message added in config view when modifying lifetime experiment - Changed how temperature and voltage issues are shown - Unlocked laser frequencies - Saturation is now only added once - Added a save Raw ADC data option in saving dialog - Added a 'best case' and and a 'measured' lifetime sampling rate - Disabled 'IRF directly' from IRF acq. view [BUG-FIXES] [BBC300] - Reset all options on clear config. [FluoPulse] - Fixed issue with BNCs still outputting signal even though settings was deleted in view - Fixed multigraphs not updating if we created DIO after lifetime experiment in config view - Fixed IRF acq view, if no IRF found and closed the view, device was still outputting signal on BNC - Fixed minor leak with saver containers not always cleared - Fixed 'Save DIOs' option not working - Fixed crash issue by removing the qthread for operations manager and creating a new class for lifetime calculations - Fixed DIO graphs growing infinitely (no remove buffered points was implemented) [WiFP] - Fix UUID that start with zero (0x05C5 will not show as 0x5C5) - Fix timeseries for headstage (ADC & IMU) data DNS Version : [6.5.0.6] Release date (R&D) : February 3rd, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [Voluscan] - Improvement of usage of Zaber stage(s) with Voluscan [BUG-FIXES] [Lightsource] - Fix loading of configuration if EEPROM is not detected or not the same as previously saved. [FluoPulse] - Multiple view fixes [Microscope] - Fix to save microscope video in .TIFF DNS Version : [6.5.0.5] Release date (R&D) : January 15th, 2025 Release date (Prod/Web) : N/A (In Progress) [NEW] [ARJ] - Adding new command to ask for rotary joint position. Also included in DLL. (new firmware needed) [BBC300] - Unlocked faster FPS [FluoPulse] - Temperature & voltage errors show on screen (with protection) [WiFP] - Adding "state" widget (triggered, waiting etc) - IMU & ADC data now successfully decoded [BUG-FIXES] [FluoPulse] - Fix to have the correct signal amplitude - Fix to have custom data chunk size for ADC trace(s) - Fix modulation editing - Fix to clear all IRF graphs between acquisition - Fix to be able to restart device within the software (without power cycle) [Microscope] - Minimum exposure for On-Semi now at 25ms - Fix for flushing/clearing data & images in between acquisition [OTPG] - Make sure to reset all data containers when starting a new acquisition [WiFP] - Fix to be able to edit channel(s) - Fix to handle antenna disconnection - Fix to handle better the disconnection of headstages DNS Version : [6.5.0.4] Release date (R&D) : December 9th, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [FluoPulse] - Adding IRF to the acquisition graph(s) [BUG-FIXES] [FluoPulse] - Fix for weird or missing timestamp - Fix doubled timestamps sometimes received [Microscope] - Adding safety check in case first image is lost [WiFP] - Blocking device so it can only be use as BBC300 slave - Fix/hacks to handle last timestamps (always erroneous) DNS Version : [6.5.0.3] Release date (R&D) : December 4th, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [BBC300] - Can now do multiple configurations (multiple cameras, using different or shared excitations) - Adding splitting/merging big file functionality [FluoPulse] - Saving & loading configuration now implemented [TIS Camera] - Now send stream information (image lost or dropped etc.) [BUG-FIXES] [FluoPulse] - Remove possibility to add multiple(infinite) configuration - Fix crash if loading a configuration that does not contains IRF - Fix optimal zooming [NC500] - Fix removing ROI data when restarting an experiements - Fix removing WiFP data when restarting an experiements DNS Version : [6.5.0.2] Release date (R&D) : November 22th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Adding Doric licence to the DeployTool - Adding OpenBLAS licence to the About dialog - Adding new TIS camera drivers to DeployTool [TIS Camera] *** IMPORTANT *** - Now use latest TIS library (IC4). Need to install new drivers for cameras [Microscope] - Fix problem of current handling with YAG/LISER DNS Version : [6.5.0.1] Release date (R&D) : November 20th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [Microscope] - Fix problem with saving video file as slave of microscope driver (all FMD families) DNS Version : [6.5.0.0] Release date (R&D) : November 11th, 2024 Release date (Prod/Web) : November 12th, 2024 Same as 6.4.2.12* (*without BUGSPLAT) DNS Version : [6.4.2.12] Release date (R&D) : November 11th, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - Background of image viewer is now more distinct from the image to prevent drawing ROI(s) out of range - Fix to prevent ROI(s) to be less than an pixel size [FPC/EPC] - Fix editing trace color using the channel editing instead of the graph editing [NC500] - Unlocking usage of more than one headstage (WiFP) (still in progress) - Use the same configuration/interface settings of BBC300 [BUG-FIXES] [General] - Fix possibility to draw ROI(s) outside of image - Fix image(s) viewer background (now stay the same as DNS background color) * IMPORTANT - Adding copy of image before displaying it. Might be the solution for The Imaging Source camera(s) random/overnight crashes. [NC500] - BFMC ROI(s) now locked when in recording mode - Fix BFMC ROI(s) creation & deletation - Fix BFMC Analog Out channel(s) indexing - Fix variable amount of data in ROI(s) dataset - Fix creation of event channel(s) after lock-in [OTPG] - Fix weird crash with OTPG4 & behavior camera editing. (using camera as slave) [Voluscan] - Now saving FPS to the data acquisition DNS Version : [6.4.2.11] Release date (R&D) : November 5th, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [General] - New HDF5 library (fix problem with threading) [BBC300] - Work on integration of WiFP used with BBC300 [BUG-FIXES] [General] - Fix possibility to draw ROI(s) outside of image - Fix image(s) viewer background (now stay the same as DNS background color) [Voluscan] - Now saving FPS to the data acquisition DNS Version : [6.4.2.10] Release date (R&D) : October 29nd, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [FluoPulse] - First draft of FluoPulse (still in progress) [BUG-FIXES] [General] - Fix usage of polygon shaped ROI(s). Changing the shape will automatically validate the polygon shape. [BBC300] - Change camera orientation to fit new mechanial design (BMFC-G3 only) [NC500] - Fix view to fit multiple headstage(s) graph(s) - Fix saving & loading of WiFP headstage(s) DNS Version : [6.4.2.9] Release date (R&D) : October 23rd, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [BBC300] - Can now use up to 40 ROIs [NC500] - Can now change WiFP headstage ADC gain (only in advanced mode) [Zaber] - Updating with newest library (DLL) [BUG-FIXES] [NC500] - Clear point markers (red dot with point info.) when clearing configuration - Refactoring of settings DNS Version : [6.4.2.8] Release date (R&D) : October 1st, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [CamLoop] - Cameras' names that can be used as CamLoop have been changed DNS Version : [6.4.2.7] Release date (R&D) : September 26th, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [CamLoop] - Adding new icon [BUG-FIXES] [NC500] - Prevent adding more than one headstage per antenna for now DNS Version : [6.4.2.6] Release date (R&D) : September 25th, 2024 Release date (Prod/Web) : N/A (In Progress) [NEW] [CamLoop] - Tracking camera (CamLoop) now listed in a new "type" of channel (for NC500, BBC300 & Light Source Driver) DNS Version : [6.4.2.5] Release date (R&D) : September 23th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [NC500] - Disconnection of WiFP antenna clears the connected headstage(s) configuration - Fix state of WiFP antenna channel selection when no headstage are paired to it - Adding more information on headstage lost connection. [Voluscan] - Better alignment on configuration icon DNS Version : [6.4.2.4] Release date (R&D) : September 16th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [FluoPulse] - Slope now sent as uint32_t. Calculation made on software [NEW] [General] - Adding BugSplat (library to have more info on bugs/crashes) - Replacing old Qt style connections [BBC300] - Possibility to use all 4 cameras BNC output for external triggering (ex: behavior cameras) (IMPORTANT : New firmware (3.0) required to use this new functionality) - Adding options to hide camera feed (same for BFPD systems) DNS Version : [6.4.2.3] Release date (R&D) : August 26th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Possibility to use SPACES in saving directories - Fix problem where the / of the driver was double in the directory name [IMU] - Fix data saving when use as slave - Fix time reset after LIVE [NC500] - Fix for renaming processes channel names - Cleaning & code refactoring for headstage (WiFP) controls & acquisition [Voluscan] - Fix problem where you could connect to device before stage (X-Y-Z) were initialized [NEW] [NC500] - Battery gauge now functional (if working on battery) - Accelerometer data from headstage now saved in .doric file [FLiP] - FLiP now named FLuoPulse Driver [RTT] - Some more bugs fix (mainly with multi zones) DNS Version : [6.4.2.2] Release date (R&D) : August 12th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [Voluscan] - Cleaning & code refactoring [NEW] [Camera] - Adding DLL(s) for SVS Vistek cameras DNS Version : [6.4.2.1] Release date (R&D) : August 6th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [EP/FPConsole] - Fix Analog Out. channel(s) maximum voltage calculation in Lock-In mode. (100% = 4.75V) [FMD] - Fix problem with possibility to load invalid pseudocolor or saturation settings [NC500] - Fix antenna selection (make sure to select a valid/present one) [USB Comm.] - Adding more safety checks to detect really old Doric motherboard (console & light sources) [Voluscan (BBC based)] - Minor bug-fixes all around + cleaning + uniformized DIO naming for BFPDV2 devices [Voluscan (OTPG based)] - Fix problem where no images and data was received to the view [NEW] [General] - All device now save start/stop time as well as master start/stop time - Windows (dock widgets) states saving improved [EP/FPConsole] - Possibility to change Analog Out. channel(s) voltage during acquisition (LIVE) in Lock-In mode [NC500] - Possibility to change Analog Out. channel(s) voltage during acquisition (LIVE) in Lock-In mode - Possibility to use Analog Out. channel(s) with Interleaved Mode. - Possibility to change Analog Out. channel(s) voltage during configuration in Interleaved Mode. DNS Version : [6.4.2.0] Release date (R&D) : July 17th, 2024 Release date (Prod/Web) : N/A (In Progress) Same as 6.4.1.11 DNS Version : [6.4.1.11] Release date (R&D) : July 17th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Squared signals don't reset TimeOn/DutyCycle to minimum value after frequencies adjustments [BBC300] - Fix for camera feed that didn't always start on time when in global GATED mode [BFPD] - Fix usage of (start/stop) behavior camera usage in global GATED mode [EP/FPConsole] - Fix for interleaved channels username [NEW] [FMD/FMD2/FMD3] - Image(s) lost count shown in view (in red if more than 1% of images are lost) - Image(s) lost timestamps saved in .doric file as attribute of the dataset [Voluscan] - Adding more scanning regions options (locking mecanisms, home position) - Improved regions selection DNS Version : [6.4.1.10] Release date (R&D) : July 10th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix saving procedure to make sure the file is closed properly & renamed [Camera] - Fix loading & saving of camera username - Removing IMU icon if no IMU sensor(s) detected - Fix saving procedure to make sure the file is closed properly & renamed [Lightsource] - Fix loading/clearing of configuration [NC500] - Making sure to unlock view after clear configuration (in case a invalid configuration is loaded) - Removing timestamp from filename when finalizing (.doric) file. [Powermeter] - Fix to send wavelength automatically when configuration view is opened DNS Version : [6.4.1.9] Release date (R&D) : July 5th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [Behavior Camera] - Fix feed with no timestamps if no name was given to camera [BBC300] - Fix clear configuration (disconnection of camera(s)) [FP/EP Console] - Fix interleaved channel(s) name editing DNS Version : [6.4.1.8] Release date (R&D) : June 27th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [General] - Fix to make sure all devices finalize their file after saving (so it doesnt stay as incomplete) [BBC300] - Fix to view that could get stuck after loading configuration [NC500] - Fix calibration made with the powermeter [USBCamera] - Fix timestamp saved twice (now saved only once) - Removing calibration settings (only needed for tracking with TIS Camera(s)) [NEW] [Camera] - Camera can now save any user determined name (username) as dataset name [NC500] - New view with more dockwidget for better visibility of all traces - New configuration view with merged channels, devices & processes settings DNS Version : [6.4.1.7] Release date (R&D) : June 25th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix for DIO settings that was sending rounded value instead of real value [Camera] - Don't save Calibration reference, if no calibration set. - USB Camera (webcam) now save TIME dataset when the video is finished/stopped. [RTT] - Temporary change so we can only draw a single ROI per Zone [NEW] [Voluscan] - New product ID for driver & motor disk DNS Version : [6.4.1.6] Release date (R&D) : June 12th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [IMU] - Fix naming of the driver [Voluscan] - Fix problem with showing ROI(s) when selecting/deselecting planes [NEW] [BBC300] - Possibility to choose BNC for the different excitations - Possibility to name each excitations [FLiP] - Improvement of the GUI - Improvement of the different settings (FLiP, detector, excitation etc.) DNS Version : [6.4.1.5] Release date (R&D) : May 30th 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [NEW] [BBC300] - New global GATED mode - Adding default black image when creating/loading a configuration [FLiP] - Improvement of the GUI - Integration fo global settings [IMU] - Using less flashy colors for axis (X-Y-Z) [RTT] - All features now in the master branch (release) DNS Version : [6.4.1.4] Release date (R&D) : May 27th 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Fix to make sure to save the version of the driver in a readable format [Camera] - Fix recording of behavior camera used as slave - Fix frequency of behavior camera when used as preconfigured settings - Fix to make sure to block behavior camera frequency widget when in use - Fix to make sure to save the version of the driver in a readable format [NC500] - Fix to make sure to save the version of the driver in a readable format [NEW] [NC500] - MAJOR VIEW CHANGES : Merged channels configurations & processes into the same widget [FLiP] - More work on settings, configuration view, event & slave camera integration - ADC/LMX/LMK initialization can now be done [Voluscan] - Improvement for the view (now use multigraphs) - Possibility to sort ROI(s) by planes DNS Version : [6.4.1.3] Release date (R&D) : May 10th, 2024 Release date (Prod/Web) : N/A (In Progress) [BUG-FIXES] [BBC300] - Make sure to use correct max exposure when creating a new preset [Behavior Camera] - Strobe mode (TTL output) from the TIS Camera now in exposure mode instead of fixed duration (This give more information on the frame captured) [NEW] [General] - Using newest QCustomPlot library [NC500] - Improved general view & processed signals configuration DNS Version : [6.4.1.2] Release date (R&D) : May 3th, 2024 Release date (Prod/Web) : N/A [BUG-FIXES] [General] - Uniformize camera view information (states, resolution, frequency etc.) - Bit count now use for the default Y range for the ROI(s) graph. - Limit some duty cycle at 99.99% if the possibility to do finite CW (continuous wave should be used for a 100% duty cycle) [EPC/FPC] - Minor fix to make sure all labels are visible in the Analog Out configuration view [BBC300] - Fix to round the frequencies using the resolution of the device (100 us increment) [IMU] - Adding missing librairies (.dll) for the rendering of IMU 3DView [NEW] [General] - Adding the newest version of the Doric Neuroscience Studio user manual (v1.6.5) [IMU] - Adding advanced sensors configuration to controls more register (hidden with Ctrl + F1) (Firmware update needed (v3.0): Doric-IMU_Firmware_V3.0.hex) [RBFMC] - Adding method to read and write a real unique identifier (UID) (Firmware update needed (v2.0): Doric-RBFMC_Gen2_Firmware_V2.0.hex) [WPI Pump] - First draft of the decoder/encoder (still need work on view) DNS Version : [6.4.1.1] Release date (R&D) : April 26th, 2024 Release date (Prod/Web) [BUG-FIXES] [General] - Adding more safety check for ROI(s) calculation (prevent crashes if out of bounds) [BBC300] - Fix shifting between signals of some presets - Fix to make sure it reset all channels & global settings when opening & closing app. [NC500] - Fix to prevent crash if microscope is added & removed in the view - Fix for calculation of the different frequency (now more precise, no more shift between Analog & Digital signals) - Fix for interleaved timing when using more than 2 interleaved channels (3 or 4) - Fix for total duration calculation [RTT] - Fix data architecture saved for tracking center of animal - Fix data architecture saved for tracking zone states [Voluscan] - Fix to make sure it reset all channels & global settings when opening & closing app. [NEW] [BBC300] - Can now do global gated series (single or multiples series) [FMD3] - Can now use behavior camera as slave (preset included if using TIS/triggered camera(s)) - Can now do global gated series (single or multiples series) [NC500] - Can now do BFPD presets (need compatible firmware to make it appear in app.) - Can now do global gated series (single or multiples series) [RBFMC] - New command to get LED EEPROM information to adjust view (current slider to control LED or laser power) [RTT] - More settings for trackings (minimum time in zones, etc.) DNS Version : [6.4.1.0] Release date (R&D) : April 22th, 2024 Release date (Prod/Web) : April 22th, 2024 [BUG-FIXES] [USB Camera] - Fix timestamps saved in .doric file DNS Version : [6.4.0.5] Release date (R&D) : April 16th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [General] - Fix load all configuration window [IMU] - Fix data saving (dataset names) - Fix graphs settings saving [TISCamera] - Added special communicator for USB2 camera DMM 37UX287-ML (rotary joint camera) [NEW] [BBC300] - Can now use Analog Out as standalone channels [NC500] - Can now reuse NC500 interleaved channels (shared channels) [LISER] - LISER will now have a real UID when first connected to DNS [Voluscan] - All Voluscan drivers now have the same view (multi-graphs) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.4.0) - Behavior Analyzer (1.1.4.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.4.0.4] Release date (R&D) : April 12th, 2024 Release date (Prod/Web) :- [BUG-FIXES] [General] - Fix for editing in the middle of saving filename [Cameras] - Fix timeserie with cameras (TIS & webcam) - Fix saving of timestamps [NC500] - Fix for saving unit & range [EPC/FPC] - Fix for saving unit & range - Fix for load & using optimal zooming [Lightsource] - Now send the wavelength automatically to powermeter (if detected) [BBC300] - Fix data leak if channel is not OFF - Fix data saving options (DIO/AOut) checkbox - Handle new compatibility (need new firmware) - Centered options [Organoid] - Fix for new configuration (bad reset, now OK) - Removing unused preset [NEW] [IMU] - Improvement for the 3D view [NC500] - Can now use NC500 as a BFPD (controls of camera & excitation with preset) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.4.0) - Behavior Analyzer (1.1.4.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.4.0.3] Release date (R&D) : March 27th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [FMD2] - Removed Ext. Analog, Complex, & Custom mode (not implemented in lightsource) - Removed sequence options (not working with new lightsource) [FMD3+LISER] - Fix current value when edited - Fix preview after edit - Removed TTLOutput from options (not implemented) - Fix interlock message [LightSource] - Fix CW limit when used in Complex mode [FMD3] - Reset trigger inbetween acquisition DNS Version : [6.4.0.2] Release date (R&D) : March 21st, 2024 Release date (Prod/Web) :- [BUG-FIXES] [FMD3] - Fix crop after binning - Fix default naming of ROI(s) - Fix for loading ONLY ROI(S) - Fix saving options for the DIO - Fix photo snapping - Fix timeserie saved settings [NC500] -Fix global settings triggering (GATED & TRIGGERED) DNS Version : [6.4.0.1] Release date (R&D) : February 14th, 2024 Release date (Prod/Web) : - *** Version 6.4.0.0 doesnt exist. [BUG-FIXES] [Andor Camera] - Removing Andor camera handling for now [LightSource] - Fix preview shifting when redrawn with starting delay [NC500] - Fix interleaved mode memory leak [Powermeter] - Fix for calibrating with the NC500 (always within ranges (min/max)) - Fix editing of the powermeter calibration [USB Camera] - USB camera used as slave now saved with the correct name in .doric file - USB cameras are now way more responsive since it stay active once open in DNS [NEW] [GENERAL] - Lot of code cleaning & abstractions improvements - Now always used TimeON/TimeOFF when calculating frequencies to ensure that the maximum device timing resolution is met. [ARJ] - Can now control ARJ manually (CTRL+F1 to make interface appear) [NC500] - Interleaved can now be use with more than 2 channels (up to 4) [Powermeter] - Added a percent of error max for the calibration [RBFMC] - New channel icon (looks like multiple fibers) [USB Camera] - Now use the new QMediaRecorder to ensure that the video have the right length - Now saved in .mp4 (same for TISCamera) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.4.0)(NEW) - Behavior Analyzer (1.1.4.0)(NEW) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.3.3.0] Release date (R&D) : February 14th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [FPC/EPC] - Fix use of powermeter with the NC500 DNS Version : [6.3.2.5] Release date (R&D) : February 12th, 2024 Release date (Prod/Web) : February 12th, 2024 [BUG-FIXES] [FPC/EPC] - Adding possibility to remove phase shift detection [Zaber Motor] - Adding more safety check when connecting a serial Zaber device [NEW] [BFPD Camera] - Adding new model of camera [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.3.0) (NEW) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.3.2.4] Release date (R&D) : January 31th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [General] - Fix for updating the LPF filter of the FPC/EPC when using multiple AIn - Fix for the default step of the antenna channel (rollback to 10 steps per channel) [NEW] [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.2.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.3.2.3] Release date (R&D) : January 23th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [General] - Fix TimeSeries saving with usage of slave camera(s) [NEW] [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.2.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.3.2.2] Release date (R&D) : January 17th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [General] - Fix for preconfigured DIO(s) used as triggering for camera or others devices. - Improvement for connection of devices [NEW] [General] - More translation to French Canadian [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.2.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.3.2.1] Release date (R&D) : January 5th, 2024 Release date (Prod/Web) : - [BUG-FIXES] [General] - Fix problem with the number of sequence getting stuck/block [NC500] - WiFP headstage use new gain & reference [NEW] [EP/FPConsole] - Console send message to "log" file when mutexes are locked [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.2.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) DNS Version : [6.3.2.0] Release date (R&D) : December 15th, 2023 Release date (Prod/Web) : December 15th, 2023 [BUG-FIXES] - Same as 6.3.1.1 [NEW] - Same as 6.3.1.1 [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.2.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.5.0) (NEW) DNS Version : [6.3.1.1] Release date (R&D) : December 14th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] [BFPD] - Fix for Timeseries timing (if using start/stop button to rapidly) - Fix sampling editing after loading a configuration file - Fix to make sure ROI(s) are valid after a change in resolution [BBC300] - Fix to block view when using TimeSeries (to make sure we cannot go LIVE or RECORD while already in TimeSeries mode) [FMD] - Fix for Timeseries timing (if using start/stop button to rapidly) [LightSource] - Fix for Timeseries timing (if using start/stop button to rapidly) [NEW] [GENERAL] - Save last path used in a QSettings (saved in registery) [FliP] - First commit made for FliP drivers [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.2.0) (NEW) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.18.0) (NEW) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.4.0) DNS Version : [6.3.1.0] Release date (R&D) : December 11th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] [BBC300] - Fix for saving/loading events [NC500] - Fix for AOut channel that stop acquiring data after LOAD + EDIT [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.1.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.4.0) DNS Version : [6.3.0.4] Release date (R&D) : December 11th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] [NC500] - Fix CW mode with AOut channels (no more spike on stop) - Fix for LockIn editing multiples time same AIn with shared AOut [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.1.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.4.0) (NEW) DNS Version : [6.3.0.3] Release date (R&D) : December 7th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] [BB300] - Default filename changed from BFPD_V2 to BBC300 - Fix for trace visibility (not shown) after loading configuration [EP/FPConsole] - Fix AIn name when editing LED power (LockIn mode) - Fix shifting (missing) data for the first AIn when used in multiples lockIn settings [Camera] - Fix for loading configuration - Fix for triggering polarity (inverted) of RBFMC camera [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.1.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.3.0.2] Release date (R&D) : December 6th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] [EP/FPConsole] - Fix for LockIn/Interleaved/Filtered settings editing/saving/loading - Fix for INTAN/ephys filtering editing/saving/loading [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.1.0)(NEW) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.3.0.1] Release date (R&D) : December 4th, 2023 Release date (Prod/Web) : N/A Same as 6.3.0.0 but with tracking enabled [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.0.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.5.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.3.0.0] Release date (R&D) : November 28th, 2023 Release date (Prod/Web) : N/A [IMPORTANT] - [Cypress] USB3.x comm. changed (need driver/firmware update for NC500 & FMD3) - [EPC/FPC] LockIn settings have changed for EPC/FPC (need to do new configuration file (.doric)) - [LISER] Improved TEC handling (need firmware update) [BUG-FIXES] - [EPC/FPC + NC500] Fix for LockIn calculation/saving (when using same AOut (slaves) with multiple AIn (masters)) - [EPC/FPC] Fix for LockIn settings editing/saving/loading - [EPC/FPC] Fix for LockIn AOut channel preview update after edit - [USB Comm.] Fix for USB comm. timeout - [BBC300] Fix data plot resizing of BBC300 - [LISER] Fix for temperature values - [LISER] Improved TEC handling - [General] Improved connection of device (faster & more responsive device selection) - [General] Various bug fixes & UI improvements [NEW] - [USB Comm.] New [Cypress] USB3.x comm. (message formatting & padding changed) - [USB Comm.] New LibUSB library - [USB Comm.] Now install USB3.x driver (Cypress) when installing the .exe [PLUGINS INCLUDED] - Doric Maintenance Tool (1.2.0.0)(NEW) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.5.0)(NEW) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.7.0] Release date (R&D) : November 17th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Improvement of NC500 microscope creation/editing/deleting - Improvement of NC500 clear configuration function - Improvement of NC500 traces name - Unlocking NC500 LockIn LPF frequency - Fix to toggle acquisition of NC500 Ephys. headstages - Fix for NC500 microscope crash when changing e-focus value - Fix for device selection using keyboard arrows - Various bug fixes for Organoid (Voluscan) - Removing inheritance of RoiSettings in other settings (added as member instead) [NEW] - Demo for VoluScan [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.4.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.6.2] Release date (R&D) : October 31th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix to be able to use more than one device that is using the serial comm. - Fix to prevent crash when using NC500 with [WiFP] data - Fix for preview scaling of LightSource (when changing the unit factor) [NEW] - IMU sensor can now be slave of FMD3 [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) - Behavior Analyzer (1.1.3.0) - Doric File Editor (1.3.12.0) - Image Analyzer (1.1.4.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.6.1] Release date (R&D) : October 24th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] [NEW] - BFPD (OTPG based) : Adding back 10Hz preset for 2CAM-3EXC-3CYC - IMU Sensor view improved (3D view, visible graph color, legend etc.) - OTPG, Console(FP/EP) & Lightsource now generate real UID when first connected - OTPG, Console(FP/EP) & microscope driver demo now produce virtual/fake data & images - DeviceSelection is now larger and use 3 columns [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) - Behavior Analyzer (1.1.3.0) (NEW) - Doric File Editor (1.3.12.0) (NEW) - Image Analyzer (1.1.4.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.6.0] Release date (R&D) : October 16th, 2023 Release date (Prod/Web) : October 17th, 2023 [BUG-FIXES] - Fix for editing LED power (lockin) (no more trace name reset) - Improvement in NC500 stability [NEW] - Possibility to load & saved general/global configuration [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) - Behavior Analyzer (1.1.3.0) (NEW) - Doric File Editor (1.3.12.0) (NEW) - Image Analyzer (1.1.4.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.5.1] Release date (R&D) : October 6th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for OTPG configuration loading & saving - Fix for TimeSerie when stop before it end - Fix for spikes in FP/EPConsole data - Fix FP/EPConsole global triggering channel status - Fix for validity check of custom file use with AOut custom mode - Fix for NC500 interleaved master/slave interation [NEW] - Improvement for event handling (mostly when DIO triggered) - Improvement for NC500 view (WiFP, Microscope & Lockin) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) - Behavior Analyzer (1.1.3.0) (NEW) - Doric File Editor (1.3.12.0) (NEW) - Image Analyzer (1.1.4.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.5.0] Release date (R&D) : September 20th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Improvements for the NC500 views - Improvement for the Organoid views - Fix for ROI(s) handling (0 sized ROI, ROI drawn outside the image) - Fix for signals preview(s) [NEW] - Organoid 8 planes mode [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) - Behavior Analyzer (1.1.2.0) - Doric File Editor (1.3.11.0) - Image Analyzer (1.1.4.0) - Signal Analyzer (1.1.3.0) DNS Version : [6.2.4.8] Release date (R&D) : September 13th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - IMPORTANT : HDF5 chunk size reduce 10X. (From 640000 down to 65536 values) - Improvements for the NC500 lockin widget & use of powermeter - Improvements for the NC500 lockin settings - Improvements for the Zaber drivers & communication [NEW] - Almost all Doric devices can now be use as demo [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.12.0) (NEW) - Behavior Analyzer (1.1.2.0) (NEW) - Doric File Editor (1.3.11.0) (NEW) - Image Analyzer (1.1.4.0) (NEW) - Signal Analyzer (1.1.3.0) (NEW) DNS Version : [6.2.4.7] Release date (R&D) : August 29th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - BFPD_Gen2 : Maximum exposure that can be used (less permissive) - BFPD_Gen2 : Image re-indexing (image lost/invalid detection improved) - BFPD_Gen2 : DIO(s) maximum frequencies - BFPD_Gen2 : Clearing/saving/loading configuration [NEW] - Zaber : Adding Zaber libraries (still in development) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.6] Release date (R&D) : August 17th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for BFPD_Gen2 ROI(s) & DIO(s) selection [NEW] - N/A [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.5] Release date (R&D) : August 14th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for BFPDGen2 lightsource power not always sent - Fix for BFPD (OTPG based) preset timing (to prevent drift between signals) - Fix for MessageLogger (log files now saved in TEMP folder) [NEW] - N/A [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.4] Release date (R&D) : August 10th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for BFPDGen2 preset timing - Minor changes for BFPDGen2 interface [NEW] - DIO(s) events for multiples devices [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.3] Release date (R&D) : August 7th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix lock-in editing issues - Fix for lightsource overdrive & lowpower handling (now use combobox) - Minor changes for BFPDGen2 interface - Doric colors now "common" & reused [NEW] - IMU sensor encoder/decoder implemented - First small IMU sensor interface - MessageLogger to get qInfo, qCritical, qFatal information on file [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.2] Release date (R&D) : July 27th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for cleaning USB endpoints correctly when closing software - Multiples fixes for Organoid (updating sampling rate, ROI(s) cleaning) [NEW] - Updated translations - BFPDGen2 view improvements - First draft for Doric devices demo [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.1] Release date (R&D) : July 17th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for closing USB device(s) - Fix for OTPG flushing signal (problem with unlocking view) [NEW] - Clean DoricCommon (resource moved, used of data as QSharedPointer - Improvement for Organoid - First draft for OrganoidV2 [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) - Image Analyzer (1.1.3.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.0] Release date (R&D) : July 13th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Lightsource now round the frequency of sequences to the closest possible (using minimum clock resolution of the microcontroller) - Fix powermeter units (now use uW instead of mW) - Fix for lightsource preview in custom mode - Various bug fixes for BFPD Gen2 [NEW] - LISER can now achieve ramps & triangle sequences - Rotary joints (ARJ) can now be controls by the software (need firmware update) - NC500 now display information about headstage & basestation - First draft for Organoid Gen2 [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.4.0] Release date (R&D) : June 15th, 2023 Release date (Prod/Web) : June 15th, 2023 [BUG-FIXES] - Fix memory leak when using square wave preview (LightSource & Console) - Fix BFPD/OTPG data flushing (unlocking interface after being stopped) - Fix default values when using lock-in mode with ILFMC options - Improvement for BFPDV2, NC500 & Rotary Joints GUIs [NEW] [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.3.0] Release date (R&D) : June 12th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for Organoid image capturing - Minor GUI changes for Rotary Joints [NEW] [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.2.1] Release date (R&D) : June 8th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Device disconnection improvement [NEW] - Rotary joint (standalone + slave) fully implemented - First draft of Andor camera driver [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.2.0] Release date (R&D) : June 7th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix editing of EPConsole headstage (tethered) channels - Fix for StartAll device functionnalities - Fix keypress event channel used with FMD3 - Multiples fixes for NC500 WiFP [NEW] [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.1.0] Release date (R&D) : May 29th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for TimeSerie count for both Console & OTPG(s)/BFPD(s)/Organoid (when using number higher than 256) - Fix for NC500 lockin data saving - Fix for editing Lightsource channel(s) (loading repeatable sequence of triggering options) - Using max FPS when in external mode with TIS camera(s) - Fix LISER/LISER_1CH/LISER_MIC addressing problem - Multiples bugs fixes for NC500 WiFP/Basestation [NEW] - Integrating Organoid (file merging, settings of contrast/saturation.., roi handling etc.) - BFPD & NC500 graph(s) handling improvement [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.11.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.2.0.0] Release date (R&D) : May 15th, 2023 Release date (Prod/Web) : N/A Same as 6.1.5.4 DNS Version : [6.1.5.4] Release date (R&D) : May 15th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - IMPORTANT : Fix for ROI(s) calculation (now made on full ROI(s), not only contours) - CW Mode for EPConsole (FiWi) reimplemented [NEW] - BFPD & NC500 graph(s) handling improvement - Works on Andor camera drivers & communication (in progress) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.10.0)(NEW) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.1.0) (NEW) - Image Analyzer (1.1.3.0) (NEW) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.5.3] Release date (R&D) : May 1st, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for saving in incorrect path or with file with special characters [NEW] - BFPDV2 can now be tested (almost fully integrated) - Works on Andor camera drivers & communication (in progress) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.9.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.0.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.5.2] Release date (R&D) : April 13th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix saving of Organoid (now done in chunks) - Fix INTAN electrode filtering processes - Fix channel height of LightSources (now smaller to show at least 2 of them) - Fix for loading external TTL settings of LightSource (current value now loaded accordingly) - Fix for saving empty event list [NEW] - NC500 higher sampling rate (20kHz, 50kHz, 100kHz) - BFPDV2 GUI & driver improvement - Set the DNS process Windows priority in the Help menu [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.9.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.0.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.5.1] Release date (R&D) : March 30th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix lockin & interleaved calculation - Fix data inconsistency between different AIn channels of the FP/EP Console - Fix image/data flush when using a slave camera - Fix for ROI(s) coordinate saving [NEW] - Saving now use a predetermined/fixed chunk size - NC500 improvement for WiFP and tethered INTAN - BFPDV2 improvement of the GUI [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.9.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.0.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.5.0] Release date (R&D) : March 23th, 2023 Release date (Prod/Web) : March 27th, 2023 [BUG-FIXES] - Fix lockin light source power editing - Fix for saving BFPD ROIs - Fix FMD3 light source handling - Fix for Console 1sec TimeSeries - Fix for saving time (now always use with ISO standard) - Fix for saving directly onto a drive (ex C:/ or E:/) - Fix for LightSource triggering mode editing - Fix for LightSource custom mode maximum current handling - Fix for loading LightSource complex mode configuration - Fix for some Lightsource previews - Fix for some Console previews [NEW] - Integrate powermeter from GENTEC - TTL Output can now be use with LISERs [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.9.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.3.0.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.10] Release date (R&D) : February 23th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for blocking camera settings when in RECORD mode - Fix for camera calibration saving/loading + refactoring name - Fix for camera name size when using smaller resolution - Fix for saving slave camera images & timestamps (less losses) / improvement of mutexes usages - Fix for saving/loading lightsource complex mode settings - Fix for saving/loading lockin & interleaved graphics settings - Fix for OTPG4 graphics display - Fix for OTPGx graphics display when used in INVERT mode - Fix for TimeSerie that was block for a minimum of 10hours - Fix for Console Analog Out previews [NEW] - Added TTL Output functionality to FMD3-LISER interface - Work started for Gentec Powermeter driver integration - Added new serial communication - Improvement for NC500 interface & integration of wireless headstage - Some more traduction(s) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.8.0) - Behavior Analyzer (1.1.1.0) - Doric File Editor (1.2.0.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.9] Release date (R&D) : February 6th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - FIx for LightSource(s) maximum current when used in Complex Mode [NEW] - Improvement for BFPDV2 global settings - Improvement for NC500 encoders/decoders (mostly headstages/base-station) - Some more traduction(s) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.9] Release date (R&D) : February 6th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - FIx for LightSource(s) maximum current when used in Complex Mode [NEW] - Improvement for BFPDV2 global settings - Improvement for NC500 encoders/decoders (mostly headstages/base-station) - Some more traduction(s) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.8] Release date (R&D) : January 31th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for loading of graph settings with FP/EPConsole (There was a problem with INTERLEAVED) [NEW] - Improvement for BFPDV2 global settings - Improvement for NC500 encoders/decoders (mostly headstages/base-station) - TISCamera now use calibration button (no more auto-gain, auto-exposure, & white balance) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.7] Release date (R&D) : January 24th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Adding STROBE (Trig Out) for the TISCamera(s) - Optimization of the WiFP channel(s) & configuration - New ROI(s) polygon shaped - Fix to send WiFP data to NC500 - Fix for camera status (getting stuck at ACTIVE) - Fix for camera image saving (no missing last frame) - Fix for loading slave camera settings - Fix for camera calibration (when used as slave) - Fix for drag/zoom with EP/FPConsole (help for production) [NEW] - Improvement for NC500 view(s) - Now use FontAwesome 5 Pro (instead of Free) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.6] Release date (R&D) : January 11th, 2023 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for EPConsole saving - OTPG/BFPD use global settings - OTPG/BFPD use TimeSeries as others Doric devices - Fix reset zoom for webcam - Fix for event manager in multiples devices views - Some more traductions [NEW] - Improvement for NC500 view(s) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.5] Release date (R&D) : December 16th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for NC500 memory leaks - Fix for NC500 loading & saving of the windows states - Fix for NC500 INTAN live acquisition - Fix for NC500 camera settings - Fix for NC500 filepath loaded from configuration file when not valid/found [NEW] - Improvement for NC500 view(s) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.4] Release date (R&D) : December 15th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - MAJOR CHANGES : Image(s) from TIS Camera are now sent to controller after being converted into QImage (This should fix a lot of timing and indexes problems related to camera(s)) - MAJOR CHANGES : ConsoleGen2 now rename with it final name -> NC500 in all .doric files - Fix plugins that was not reconized by the app. - Some more traductions of the Qt default object (QFileDialog, QColorPicker etc...) [NEW] - Improvement for NC500 view(s) & controls (DIO triggering microscope, INTAN encoding/decoding, etc.) [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.3] Release date (R&D) : December 13th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Lock-In channel(s) renaming for FP/EPConsole - Fix for closing EPConsole when FiWi channel(s) are in use - Fix for slave camera(s) options (now mostly in a pop-up window) - FIx for name of configuration file. Now use a default name containing data and time - Fix for FMD3 LISER global triggering - Fix ROI(s) saving. More information added to the dataset as attributes - Some more traductions [NEW] - Start/Stop time now save as attributes - Microscope images feed can now be saved as .TIFF, .avi is removed - Improvement for Organoid view(s) - Improvement for NC500 view(s) Doric Maintenance Tool - New filter name for the NC500 reprogramming HDF5 Viewer (1.1.2.0) - Import DATA into .doric file - Import VIDEO in .doric file [PLUGINS INCLUDED] - Doric Maintenance Tool (1.1.7.1)(NEW) - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.2.0)(NEW) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.2] Release date (R&D) : November 30th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for FMD3 LISER with Microscope (triggering & DIO handling) [NEW] - Microscope driver can now save image feed as .avi file [PLUGINS INCLUDED] - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.1.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.1] Release date (R&D) : November 23th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for EPConsole FiWi channel(s) acquisition (Need motherboard firmware changes) - Fix for lightsource channel(s) editing (when there's multiples channel(s)) - Fix for Behavior camera(s) white balance (now timed) - Fix for Behavior camera(s) closing when used as slave [NEW] - Improvement for the NC500 view (microscope & behavior camera(s) options) - Improvement for the Organoid view [PLUGINS INCLUDED] - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.1.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.4.0] Release date (R&D) : November 11th, 2022 Release date (Prod/Web) : November 11th, 2022??? à confirmer [BUG-FIXES] - Fix for FP/EPConsole Analog Out preview - Fix for Lightsource preview - Fix for stair mode period preview [NEW] - Improvement for the NC500 view [PLUGINS INCLUDED] - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.1.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.3.1] Release date (R&D) : November 8th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for BFPD camera centering - Fix for NC500 microscope initialization [NEW] - Improvement for the NC500 [PLUGINS INCLUDED] - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.1.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.3.0] Release date (R&D) : November 7th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - N/A (Same as 6.1.2.0) [NEW] - Include definition of paid vs free plugins [PLUGINS INCLUDED] - Behavior Analyzer (1.1.1.0) - HDF5 Viewer (1.1.1.0) - Image Analyzer (1.1.2.0) - Signal Analyzer (1.1.1.0) DNS Version : [6.1.2.10] Release date (R&D) : October 26th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for saving last data of a series (OTPG/BFPD) - Fix for naming of trace of lock-in channel (FP/EPConsole) - Fix for replotting fluidity when using high freq. (FP/EPConsole) - Fix for preset timing (data shifting fix) (BFPD) - Fix for duty cycle when using complex mode (Light Sources) - Fix for clearing configuration. It now also clear the behavior/slave camera (All devices) - Fix for microscope light source triggering (Microscope Ethernet 2 Colors) [NEW] - More improvement for the NC500 (Console Gen2) DNS Version : [6.1.2.9] Release date (R&D) : October 18th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix crashes when using FiWi (EPConsole) - Fix for deletation of the ROI(s) - Fix for loading sensor #2 of microscope 2color - Fix for loading BFPD configuration (removing multiples signals connections) - Fix for view enabling/disabling of Microscope USB3 - Cropping now saved/loaded with ROI(s) - Review of the translations - More precise ADC decoding for NC500 DNS Version : [6.1.2.8] Release date (R&D) : October 14th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for view deletation of ROIs within microscope views - Fix Time Series of the Console (Gen1) - Fix for the usage of filter with the Console (Gen1) - Fix for ROIs editing with the BFPD - Fix lightsource start/stop of the Microscope 1C USB3.0 - Multiples typos corrected [NEW] - Licensing information now in the About dialog DNS Version : [6.1.2.7] Release date (R&D) : October 11th, 2022 Release date (Prod/Web) : N/A [BUG-FIXES] - Fix for view deletation for LightSource, Console (Gen1) & OTPGs - Fix for FMD3 LISER light information & triggering status handling - Fix for lightsource triggering & timing at high frequency (need firmware update) - Fix for the custom mode file loading with the lightsource - Fix for connection of FMD3 LISER when using rapid double-click - Fix for Keypress Event key editing - Fix for OTPG triggering - Fix for BFPD channel(s) editing - Fix for CustomMode previews with the Console (Gen1) [NEW] - Behavior camera(s) now have a calibration factor widget - Optimization for the ROIs + limit of 30 min of data/per ROI - More improvement for the Console Gen2 - Include newest Doric Maintenance Tool (version 1.1.6.0) - Include the newest plugins DNS Version : [6.1.2.6] Release date (R&D) : September 23th, 2022 Release date (Prod/Web) : N/A - BFPD event config can now be loaded - Fixed crash with BFPD when loading config and pressing play - Fixed crash that was happening sometimes when moving ROI - Fixed crash with FMD3 LISER when powering OFF the device while DNS was opened - Fixed problems with Console when creating a channel/modulations error - LED driver now always shows the wavelength instead of current if available in "add channel" view DNS Version : [6.1.2.5] Release date (R&D) : September 21th, 2022 Release date (Prod/Web) : N/A - Fixed BFPD crash when loading webcam + other crashes - Changed default BFPD sampling rate to 1ksps instead of 500sps - Lot of view updates for NC500 - Fixed temperature LISER not showing for FMD3 LISER - Fixed FMD3 LISER not always following global gated - Fixed FM3 LISER channels not launching in timeseries mode - Fixed file index increasing by 2 for FMD3 LISER record mode - Fixed FMD3 LISER 2 lightsources could be in Microscope follower mode DNS Version : [6.1.2.4] Release date (R&D) : September 15th, 2022 Release date (Prod/Web) : N/A - Improved ROI calculation for BFPD & Organoid (still need to be implemented for Microscope) - Improvement for NC500 GUI - Improvement for Rubix LED maximum current handling - Fixes for FMD3 (LISER) (Microscope follower mode, triggering, time series etc.) DNS Version : [6.1.2.3] Release date (R&D) : August 31th, 2022 Release date (Prod/Web) : N/A - Fix for OTPG view (channel now appear as supposed to) - Fix for Console Gen2 crashing upon start - Fix for BFPD channel(s) editing & triggering selection - OTPG can now control slave camera - Fix for USB communication (problem when receiving data while the device is not ready) DNS Version : [6.1.2.2] Release date (R&D) : August 22th, 2022 Release date (Prod/Web) : N/A - Fix for message when trying to load configuration with a wrong config. file - Allow LED power to be reduced down to 5% in low-power mode (LockIN of FPC/EPC) - More improvement for the Console Gen2 - More improvement for the BFPD Gen2 - Include newest Doric Maintenance Tool (version 1.1.5.0) DNS Version : [6.1.2.1] Release date (R&D) : August 10th, 2022 Release date (Prod/Web) : N/A - Fix for BPFD exposure slider values - Fix for Time Series problem with LightSource - Add all channels widget in BFPD to be able to modify the triggering of each channel independantly - Add possibility to load custom waveform for LightSource - Fix for preview of Lightsource when using complex mode - Fix for drop-down menu of of detector list (Console Gen1) - Improvement of the slave camera view (camera used with Console Gen1) - Include the new plugins [V1.1.0.6] - More information (What's This) for the interface - More improvement for the Console Gen2 DNS Version : [6.1.2.0] Release date (R&D) : July 7th, 2022 Release date (Prod/Web) : July 7th, 2022 - Fix for microscope + LISER LED/LD interface (channel creation) - Fix for the BFPD ROIs graph (Y Axis now depend on the bit count of the image) - Fix for the BFPD TimeSerie - Fix/Removing BFPD experiement triggering options - Fix for the BFPD 2nd camera options when editing preset - Fix for Microscope binning options - Fix for Microscope cropping multiple times - Fix for LED complex mode maximum value - Improvement of the slave camera view (camera used with Console Gen1) - Include the new plugins - More information (What's This) for the interface - More improvement for the Console Gen2 DNS Version : [6.1.1.12] Release date (R&D) : June 22th, 2022 Release date (Prod/Web) : N/A - Fix for microscope + LISER LED/LD interface (channel creation) - More improvement for the Console Gen2 DNS Version : [6.1.1.11] Release date (R&D) : June 20th, 2022 Release date (Prod/Web) : N/A - Fix for saturation bar in Console Gen1 (FP/EP) - Fix for camera saving file indexing - Fix for camera default resolution - Fix for language selection, now need to restart app. to apply changes - Adding Event to the TIS Camera & webcam (Behavior Camera) - Adding recording/live time in camera view (TIS + webcam) - Adding new state for camera view (Waiting for first image...) DNS Version : [6.1.1.10] Release date (R&D) : June 14th, 2022 Release date (Prod/Web) : N/A - Fix for recording with BFPD with preset using multiples camera - Fix for closing USB webcam interface - Multiples fixes for Lightsource interface & preview - Fix for saturation bar in Console Gen1 (FP/EP) - Now translated to French Canadian - Include newest Doric Analysis Plugins (v1.1.0.4) - Include newest Doric Maintenance Tool (version 1.1.4.0) DNS Version : [6.1.1.9] Release date (R&D) : May 27th, 2022 Release date (Prod/Web) : N/A - Now handling USB cameras (webcam) - New LISERs Gen2 support added - Fixed loading a config file with a non-existent filepath - Fixed un-tabbed events not working - Minor adjusments done on event - Fixed microscope saving DNS Version : [6.1.1.8] Release date (R&D) : May 18th, 2022 Release date (Prod/Web) : N/A - BFPD view now blocked the exposure & gain when active - BFPD fix for DIOs data saving - PoLight lens characterization integrated - TimeSerie now included for Microscope USB 3.0 (as in Console Gen1) - Fix to save interleaved graph settings with Console Gen1 - Fix for the Lightsource preview in Complex mode DNS Version : [6.1.1.7] Release date (R&D) : May 17th, 2022 Release date (Prod/Web) : N/A - BFPD now use driver timestamp instead of camera timestamp. DNS Version : [6.1.1.6] Release date (R&D) : May 16th, 2022 Release date (Prod/Web) : N/A - Major changes in BFPD camera image indexing (need firmware change) - First integration of the PoLight lens controls - Fix for saving firmware version in .doric file - Fix for the filtered Analog-In data (Console Gen1) - Fix for BFPD configuration view (default sampling - Fix for the LightSource preview - Improvement for the Console Gen2 (view, decimation etc) - Include newest Doric Analysis Plugins (v1.1.0.3) - Include newest Doric Maintenance Tool (version 1.1.3.0) DNS Version : [6.1.1.5] Release date (R&D) : April 28nd, 2022 Release date (Prod/Web) : N/A - Fix for OTPG pulse timing - Fix for OTPG4 data handling - Fix for the Microscope USB3.0 timeseries - Improvement for the Console Gen2 - NEW event handling for OTPG & BFPD DNS Version : [6.1.1.4] Release date (R&D) : April 22nd, 2022 Release date (Prod/Web) : N/A - Fix for console filter processing DNS Version : [6.1.1.3] Release date (R&D) : April 21th, 2022 Release date (Prod/Web) : N/A - Fix for Console AOut channel(s) editing DNS Version : [6.1.1.2] Release date (R&D) : April 21th, 2022 Release date (Prod/Web) : N/A - Fix for BFPD Saving - Fix for saving TimeSeries properties - Fix for BPFD camera orientation - Fix for LISER/Ce:YAG device information - Fix for TimeSeries increment for microscope - New possibility to load .csv file with data pts for Console Analog Out - Improvements on ConsoleV2 - Include newest Doric Maintenance Tool (version 1.1.0.4) DNS Version : [6.1.1.1] Release date (R&D) : April 6th, 2022 Release date (Prod/Web) : N/A - Fix for lightsource low-power mode - Fix for behavior camera saving format - Timeseries improvement (new interface) - Include newest Doric Analysis Plugins (v1.1.0.2) DNS Version : [6.1.1.0] Release date (R&D) : April 1st, 2022 Release date (Prod/Web) : N/A - Fix to be able to save video from camera in .doric format - Fix for format file saved byt the behavior camera (same architecture as other devices) - Fix for current handling for Ce:YAG & LISER - Fix for the microscope connection handling via a rotary joint - Fix new timeseries for microscope USB3.0 - Adding orientation flip (horizontal & vertical) for Behavior Camera - Adding default horizontal flip to BFPD 2nd camera - Adding more version check for devices in the device selection - Improvement of GUI for Console 2nd generation - Include newest Doric Maintenance Tool (version 1.1.0.1) - Include newest Doric Analysis Plugins (v1.1.0.1) - Include back the Optrode Simulator plugins (v1.0.0.0) DNS Version : [6.1.0.0] Release date (R&D) : March 17th, 2022 Release date (Prod/Web) : N/A - Lightsource & microscope now handle new EEPROM information - Fix for LISER output when using EXTERNAL mode(s) - Fix for EPConsole (intan) saving - Fix BFPD preset selection and default resolution - Fix BFPD camera settings (camera selections) - Fix console(s) (FP/EP) problem of RAM usage when using INTERLEAVED mode - Fix microscope binning problem - New TimeSeries handling for Microscope USB3.0 - Geneal color of sliders changed - Include newest Doric Maintenance Tool (version 1.1.0.0) - Include newest Doric Analysis Plugins (v1.1.0.0) DNS Version : [6.0.0.21] Release date (R&D) : March 3rd, 2022 Release date (Prod/Web) : N/A - Fix for ROIs drawing for BPFD and Microscope - Fix for reset and optimal zooming of ROIs plot - Fix for default lockin name in Console - Fix for complex mode when used with a LISER - Fix for microscope lightsource light powering - Include newest Doric Maintenance Tool (version 1.0.0.13) - Include newest Doric Analysis Plugins (v1.0.0.6) DNS Version : [6.0.0.20] Release date (R&D) : February 25th, 2022 Release date (Prod/Web) : N/A - Fix for FP/EP Console decimation consistency - Fix for Microscope default ROI(s) saving options (checked) - Fix for BFPD ROI(s) loading with default resolution - Improvement for the Console Gen2 DNS Version : [6.0.0.19] Release date (R&D) : February 24th, 2022 Release date (Prod/Web) : N/A - Fix for FP/EP Console decimation consistency - Fix for FP/EP Console spike in AOut signals - Fix for FP/EP Console reset of AOut signals - Fix for FP/EP Console closing when an acquisition is still active - Fix BFPD DIO(s) triggering options - New stair(s) mode for FP/EP Console DNS Version : [6.0.0.18] Release date (R&D) : February 21th, 2022 Release date (Prod/Web) : N/A - Fix for FP/EP Console lock-in - Fix for FP/EP Console global triggering (gated) - Fix for FP/EP Console closing of the slave(s) channel(s) in lockin & interleaved mode - Fix for FP/EP Console recording of TimeSeries (last point of series) - Fix for FP/EP Console stopping acquisition if no more channel are active - Fix for OTPG/BFPD stopping acquisition if no more channel are active - Minor GUI fix for device selection DNS Version : [6.0.0.17] Release date (R&D) : February 17th, 2022 Release date (Prod/Web) : N/A - Fix for FP/EP Console settings sending - Fix for the lockin interface - Improvement on HDF5 files architecture - Fix for BFPD data saving in TimeSeries (last point of series) - Fix for LISER external triggering - Fix for the creation of the TEMP folder - Fix for BFPD timestamp when using master trigger - Several bugs fix for Lightsource(s) interface - Major advance on Console Gen2. - Include newest Doric Maintenance Tool (version 1.0.0.12) DNS Version : [6.0.0.16] Release date (R&D) : February 11th, 2022 Release date (Prod/Web) : N/A - New decimation for lock-in mode of the EP/FPConsole - EP/FPConsole Timeseries now tested & improved. - Fix for EP/FPConsole use of global triggering (no more blocking window) - Fix for lightsource (Ce:YAG/LISER) max current handling - Fix for lightsource interlock residual current - Fix for reset of the lightsource on app. shutdown - Various fix for the microscope (binning, ROIs editing, pseudocolor, eeprom reading etc.) - Adding sensor username to microscope settings - Fix for optimal zooming of the BFPD - Removed .doric file from Behavior Camera - Removed all .csv saving - Improvements in the HDF5 architecture - More integration for the Console 2ndGen. - More integration for the Microscope/LISER - Include newest Doric Maintenance Tool (version 1.0.0.11) - Include newest Doric Analysis Plugins (v1.0.0.5) DNS Version : [6.0.0.15] Release date (R&D) : February 1st, 2022 Release date (Prod/Web) : N/A - Several bug fix for the Microscope (1C & 2C, 1st Gen) - Several bug fix for the Console 2ndGen.\ - Several bug fix for the Lightsource (especially LISER/Ce:YAG) - Include newest Doric Analysis Plugins (v1.0.0.4)(build with Qt 6.2.2 Entreprise) DNS Version : [6.0.0.14] Release date (R&D) : January 24th, 2022 Release date (Prod/Web) : N/A - Now build with Qt 6.2.2 (Entreprise). Include new licence terms & conditions - Fix for Microscope acquisition (now save all images when triggered) - Fix for Microscope GUI (no more interface cropped) - Several bug fix for the Console 2ndGen. - Include newest Doric Analysis Plugins (v1.0.0.3)(build with Qt 6.2.2 Entreprise) DNS Version : [6.0.0.13] Release date (R&D) : January 20th, 2022 Release date (Prod/Web) : N/A - Fix for Console 1stGen long acquisition - Multiples fixes for microscope image acquisition - Multiples bug-fixes for BFPD (ROIs handling, data saving, GUI optimization) - Include processing for on the Console 2ndGen - Include microscope for on the Console 2dnGen GUI & some message encoding/decoding - Include newest Doric Analysis Plugins (v1.0.0.3) DNS Version : [6.0.0.12] Release date (R&D) : December 9th, 2021 Release date (Prod/Web) : N/A - Fix loading of Microscope USB 3.0 configuration - Fix for loading HDF5 file in READ-ONLY when not having full access granted - Fix for BFPD view (unblocking/blocking during acquisition) - Fix for the editing of lock-in channel with EP/FPConsole - Windows state are now saved & loaded with the configuration - Behavior Camera now save .doric file containing the video images timestamps - Autoscrolling are now capped to 999sec and 30sec by default - Added more info for dataset(s) (min/max range & units) - New OTPG/BPFD TimeSeries mode. Now handled by the device (need firmware update) - Include first "draft" on the ConsoleV2 GUI & some message encoding/decoding - Include newest Doric Analysis Plugins (v1.0.0.2) - Include newest Doric Maintenance Tool (version 1.0.0.10) DNS Version : [6.0.0.11] Release date (R&D) : November 12th, 2021 Release date (Prod/Web) : N/A - Fix for the Lightsource settings handling - Fix for the Lightsource complex mode previews - Fix crashes when using complex mode - Fix for the filtering options for HDMI-T16 - Fix BFPD camera resolution (using RBFMC cameras with smaller resolution) - Fix for the ROI(s) drawing - Fix for the console acquisition (random crash due to threading) - Renaming INTAN into HDMI-T16 - Minors views fixes - Inlcude our newest logo - Include newest Doric Analysis Plugins (v1.0.0.1) - Include newest Doric Maintenance Tool (version 1.0.0.9) DNS Version : [6.0.0.10] Release date (R&D) : October 26th, 2021 Release date (Prod/Web) : N/A IMPORTANT : DNSv6 now build with Qt 6.2.0 MSVC 2019 64bits - Fix for the Interleaved signals calculation - Fix for the saving of the Time Serie(s) in HDF5 format - Fix for the BFPD digital IO(s) channel(s) (possibility to use them independantly) - Fix for some triggering options of the LightSources - QCustomPlot now use the OpenGL renderer - Include newest Doric Maintenance Tool (version 1.0.0.7) DNS Version : [6.0.0.9] Release date (R&D) : September 27th, 2021 Release date (Prod/Web) : N/A - Multiples bugs fixes for Microscope, OTPG/BFPD, Console, Lightsource etc. - BFPD now working as expected - Microscope now handle multiples ROIs - New HDF5 architecture DNS Version : [6.0.0.8] Release date (R&D) : July 12th, 2021 Release date (Prod/Web) : N/A - Multiples bugs fixes for Microscope - Minor changes in default configuration of multiples devices - BFPD is currently in remodeling (ROI(s) not working) DNS Version : [6.0.0.7] Release date (R&D) : May 31th, 2021 Release date (Prod/Web) : N/A - Configuration saving/loading reimplemented - Data saving reimplemented - Include new triggering modes (pause, continuous etc..) - Fix for the different drivers connection - Fix for the general application threading - BFPD is currently in remodeling (not working) DNS Version : [6.0.0.6] Release date (R&D) : April 5th, 2021 Release date (Prod/Web) : N/A - Sixth version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - Fix for the different drivers connection - Fix for the general application threading - Fix for the microscope frame handling - Fix for the TIS camera communication (saving broken for Behavior Camera)(BFPD broken as well) - Fixes for the console acquisition DNS Version : [6.0.0.5] Release date (R&D) : February 22th, 2021 Release date (Prod/Web) : N/A - Fifth version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - Now tested by Kate & others project leader in Doric Lenses. - Console (FP) now included with Interleaved & lock-in - Fix for the USB Behavior Monochrome camera image format. - Fix for the BFPD cameras DNS Version : [6.0.0.4] Release date (R&D) : January 18th, 2021 Release date (Prod/Web) : N/A - Fifth version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - Console (FP) now included (Only DIO, AOut & AIn (linear)). DNS Version : [6.0.0.3] Release date (R&D) : December 14th, 2020 Release date (Prod/Web) : N/A - Fourth version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - New TRIGGERED mode [Restart, Continue, Paused] (for OTPGs/BFPDs & LightSources) - New GATED mode [Restart, Continue, Paused] (for OTPGs/BFPDs & LightSources) - A lot of bug fixes for the view of OTPGs, BFPDs, LightSource & Microscope. DNS Version : [6.0.0.2] Release date (R&D) : November 19th, 2020 Release date (Prod/Web) : N/A - Third version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - Device incorporated in the software : * Plugins from the version 5 have been integrated * LightSource now supposed to be fully functional * Behavior Camera * OTPG/BFPD * Microscope Single Driver & Microscope 2-Color Driver working (see Latest firmware for to update the device you want to test. Use Doric Maintenance Tool to update) DNS Version : [6.0.0.1] Release date : September 22th, 2020 Release date (Prod/Web) : N/A - Second version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - Device incorporated in the software : * Behavior Camera * OTPG/BFPD * Microscope Single Driver & Microscope 2-Color Driver working * Part of the LightSource Driver is working * Views have been optimized & uniformized all around the software DNS Version : [6.0.0.0] Release date : August 28th, 2020 Release date (Prod/Web) : N/A - First version compiled of Doric Neuroscience Studio (version 6). Will only be used as beta test for the different project leaders - Device incorporated in the software : * Behavior Camera * OTPG/BFPD * Microscope Single Driver & part of the Microscope 2-Color Driver working * Part of the LightSource Driver is working