0 Item Items
Warning: Last items in stock!
Depending of its coatings, the right angle prism can be used as internal, external or knife edge 90 degrees mirror or as 180 degrees retro-reflective mirror. The precision of the beam deviation is dependent on the precision of its right and 45 degrees angles.
To generate the code for your product, use the code generator below. Once created, copy the code in an email and send it at email@example.com to request a quote.
The feasibility of the selected configuration is to be confirmed by the Sales department.
ORDERING CODE: RAP_Glass_a_b_L_S1(λ1-λ2)_S2(λ1-λ2)_S3(λ1-λ2)
a - Length of leg a (mm)
b - Length of leg b (<=a) in mm
L - Prism length (mm)
S1(λ1-λ2) - Coating code
S2(λ1-λ2) - Coating code
S3(λ1-λ2) - Coating code
S is reserved for the lens coating specification code. The most common examples are provided in Preferred Coating Table. AR means Anti-reflective coating. Unless otherwise specified, R<0.5% across usable numerical aperture of the lens and within appropriate spectral range.
For other parameters consult PDF.
In-stock Right-angle Prisms
|Dimensions Tolerance||+/- 0.1 mm|
|Clear Aperture||90 %|
|Surface Quality||10 Scratch-dig|
|Angular Tolerance||+/- 3 arcsec|
|Bevels at 45°||less than 0.5 mm, sharp edge at 90°|
|Pyramid error||+/- 3 arcmin|