Fluorescence Microscope Holder

FMH

For in vitro and head-fixed in vivo observations, it is desirable to have a microscope holder coaxial with microscope that fits stereotaxic instrumentation or micromanipulators. 

More details

For in vitro and head-fixed in vivo observations, it is desirable to have a microscope holder coaxial with microscope that fits stereotaxic instrumentation or micromanipulators. As our optical connector has axial position, we constructed holder to be optical interface as well. The microscope holder allows for imaging while implanting the cannula from a stereotaxic frame.

FMH-DRAWING.pdf

Fluorescence microscope holder

Download (139.6k)
  • CAD$0.00

    Doric Connectorized LEDs couple high brightness LEDs into an FC receptacle compatible with an FC connectorized fiber-optic patch cord. Each Connectorized LED is actively aligned for optimum output power and its optical design provides the maximum fiber-coupling efficiency into multimode optical fibers.

    CAD$0.00
  • CAD$0.00

    The Basic Snap-in Fluorescence Microscope Body is offered in two models: S or L. Both models have the dichroic beam-splitter, M3 optical connector, CMOS sensor etc. Each CMOS has a serial number stored within its cable that points to a specific set of mask correction filters recognizable to our software package.

    CAD$0.00
  • CAD$0.00

    The Optogenetically Synchronized Fluorescence Microscope or OSFM, combines fluorescence imaging and optogenetic stimulation/inhibition capabilities within the miniature fluorescence microscope.

    CAD$0.00
  • CAD$0.00

    This adaptor allows for an easy fit between the Fluorescence Microscope Holder and most stereotaxic frames. It is compatible with our Fluorescence Microscope Holders.

    CAD$0.00
  • CAD$0.00

    The Dummy Microscope is a look-alike, inexpensive replica of the Snap-in Fluorescence Microscope Body that fits any Snap-in Imaging Cannula.

    CAD$0.00
  • CAD$0.00

    A Ce:YAG Fiber Light Source system includes an optical head and an electronic driver linked by an HDB15 cable. Optical heads of Ce:YAG Fiber Light Sources are optimized for optical fibers core diameters of 200 µm to 400 µm and numerical aperture NA = 0.53. The fiber-coupled output power increases with the core diameter up to about 600 µm.

    CAD$0.00
  • CAD$0.00

    This Ce:YAG optical head is coupled with a 465 nm LED.

    CAD$0.00