Gimbal Holder for FRJ_1x1, FRJ_1x2, FRJ_1x4, HRJ-OE, LEDFRJ (1ch)

GH_FRJ

A gimbal holder allows pivoting the rotary joint along two additional axes, further reducing the mechanical stress on the animal.

More details

A gimbal holder allows pivoting the rotary joint along two additional axes, further reducing the mechanical stress on the animal.

Notes:
• The gimbal holder is compatible with the 1x1 (FRJ_1x1), the Pigtailed 1x1 (FRJ_1x1_PT), 1x2 (FRJ_1x2i, FRJ_1x2w) and the 1x4 (FRJ_1x4i) Fiber-optic Rotary Joints. It is also compatible with the Electrical (ERJ), the Fiber-optic & Electric Rotary Joint (HRJ-OE) and the LED + Fiber-optic Rotary Joint (LEDFRJ).
• The In-line Adapter is 10 cm long and can be added at one end (SIA).




Dimensions96 x 69 x 25 mm³
Mass27 g

GH_FRJ-DRAWING.pdf

Rotary joint gimbal mount

Download (76.53k)
  • CAD$0.00

    A connectorized LED  integrated into a fiber-optic rotary joint.

    CAD$0.00
  • CAD$0.00

    The 1x1 Fiber-optic Rotary Joint is the basic and the most popular type of rotary joints. It can either transmit the light from the sources to the sample and/or from the sample to a photodetector.

    CAD$0.00
  • CAD$0.00

    The 1x2 Fiber-optic Rotary Joints are used to divide the light coming from a single input optical fiber on a fixed side to two output optical fibers on a rotating side.

    CAD$0.00
  • CAD$0.00

    The 1x2 Fiber-optic Rotary Joints are used to divide the light coming from a single input optical fiber on a fixed side to two output optical fibers on a rotating side.

    CAD$0.00
  • CAD$0.00

    We have developed a passive Electrical Rotary Joint usable for electrophysiological experiments that can be combined with fiber-optic rotary joints (1x1 or 1x2) to bring light to and/or from the sample.

    CAD$0.00
  • CAD$0.00

    To facilitate in vivo experiments combining the light stimulation and electrophysiological recordings in optogenetics experiments, we have developed a passive low torque hybrid rotary joint with a number of electrical channels and one optical channel. 

    CAD$0.00
  • CAD$0.00

    The 1x4 Fiber-optic Rotary Joint is used to send the light coming from a single optical fiber to 4 different regions on a moving animal via separate optical fibers. 

    CAD$0.00
  • CAD$0.00

    We offer adapters to attach our stereotaxic holders on stereotaxic frames that use 7.9 mm or 5 mm diameter rods as standard.

    CAD$0.00
  • CAD$0.00

    Fiber photometry experiments detect small power variations from a fluorophore and for that reason the fiber-optic rotary joints within the setup require minimal transmission variation. 

    CAD$0.00