2-site 2-color Fiber Photometry System - GCaMP recording with two excitation wavelengths - 405 and 465 nm

This 2-site 2-color Fiber Photometry System measures the 405 nm (isosbestic point) excited GCaMP fluorescence, and the 465 nm excited calcium-dependent GCaMP fluorescence, on a single photodetector. The fluorescence emission can be demodulated by lock-in detection, or by sequential acquisition.

More details

CODE GENERATOR


This 2-site 2-color Fiber Photometry System measures the 405 nm (isosbestic point) excited GCaMP fluorescence, and the 465 nm excited calcium-dependent GCaMP fluorescence, on a single photodetector. The fluorescence emission can be demodulated by lock-in detection, or by sequential acquisition.

The 2-site 2-color Fiber Photometry System for GCaMP recording with two excitations wavelengths - 405 and 465 nm contains:


Note: Other light sources, i.e. laser diodes or Ce:YAG light sources, and different fluorophore combinations are possible. Please do not hesitate to add your preferences.

Fluorescence_Detector_MANUALV1.0.0.pdf

User Manual for Doric Fluorescence Detector and Fluorescence Mini Cube with Built-in Detector Head

Download (1.41M)
  • CAD$0.00

    Doric programmable LED Drivers are available in 1-, 2-, and 4-channel versions. When connected to a Connectorized LED having an eprom memory, the LED Driver recognizes the LED wavelength and automatically sets the maximum current value to avoid accidental overdriving.

    CAD$0.00
  • CAD$0.00

    Doric Connectorized LEDs couple high brightness LEDs into an FC receptacle compatible with an FC connectorized fiber-optic patch cord. Each Connectorized LED is actively aligned for optimum output power and its optical design provides the maximum fiber-coupling efficiency into multimode optical fibers.

    CAD$0.00
  • CAD$0.00

    This FPGA based data acquisition unit synchronizes the output control and the acquisition of the input data. This device seamlessly integrates with Doric Neuroscience Studio, which provides the user-interface for multi-channel photometry experiments.

    CAD$0.00
  • CAD$0.00

    The Fiber Photometry Cannula Holder is designed to enable the recording of the fluorescence during the implantation of the cannula.

    CAD$0.00
  • CAD$0.00

    The Assisted 2x2 Fiber-optic & Electric Rotary Joint allows frictionless rotation of 2 independent optical channels and 24 electrical channels thanks to motorized assistance. The pigtailed rotary joint is benificial when a high-stability output is required.

    CAD$0.00
  • CAD$0.00

    This version of the FMC4 allows for locked-in or sequential detection of autofluorescence and fluorophore excitation. For optimal performance, a built-in fluorescence detector is used.

    CAD$0.00
  • CAD$0.00

    This rack-mount (19'') photometry rack allows for the housing of more complex systems requiring the bigger 4-channel LED driver. It is suitable for use with systems containing FMC6 or FMC7, or for multi-site fiber photometry systems as the 2-site 2-color Fiber Photometry Systems for GFP and RFP.

    CAD$0.00