1x2 Fiber-optic Rotary Joints - Intensity Division

The 1x2 Fiber-optic Rotary Joints are used to divide the light coming from a single input optical fiber on a fixed side to two output optical fibers on a rotating side.

More details

CODE GENERATOR


The 1x2 Fiber-optic Rotary Joints are used to divide the light coming from a single input optical fiber on a fixed side to two output optical fibers on a rotating side. The 1x2 Fiber-optic Rotary Joints - Intensity division sends half of the input light into each of the two output receptacles. This is particularly useful for bilateral stimulation experiments, where the illumination intensities must be the same in each channel.

Notes:
• A compatible holder is included with the 1x2 Fiber-optic Rotary Joints (Holder_FRJ_large).
• The output fiber-optic patch cords are included.
• An optional gimbal holder can be used to simultaneously pivot and rotate the rotary joint around an axis (GH_FRJ).

Maximum variation+/- 3% of the mean
TransmissionOver 40% per channel
Input NA0.22
Output NA0.22 or 0.5
Start up torque30 µN·m
Length53 mm
Outer Diameter31 mm
Mass54 g
HolderHolder_FRJ_large included
NoteTested with 200 µm core NA 0.22 fiber-optic patch cords

FRJ_1x2-MANUALV1.1.pdf

1x2 fiber optic rotary joint user manual

Download (2.23M)